Shimano XT FC-M8000 1x Crank Arms

Upgrade your trail time.

Building up a new bump-devouring enduro sled has never been more fun. Rather than agonizing over the cost of pro-level drivetrains, self-sponsored cyclists have the privilege of riding components nicer than what the pros of not so long ago were riding. Shimano's XT drivetrain is a perfect example of this; if XTR's not in the cards, save yourself a giant credit card bill and upgrade to XT instead. The new XT FC-M8000 1x Crank Arms recently received an opulent upgrade, returning with better bearings and seals as well as XTR's Hollowtech II Construction, ready to barrel through the rough and rocky stuff with poise.

Before you pick up the FC-M8000 and start to doubt that it's solid enough to actually withstand the abuse you're about to give it on-trail, think about Hollowtech II. Cold-forged aluminum with a hollowed center establishes an extremely durable structure, while shaving unnecessary weight from the middle of the crank arms. Don't concern yourself with longevity or durability worries, because the FC-M8000's bombproof construction actually makes it stronger than many solid crank arms. Enjoy smoother bearings and seals better equipped to keep out dirt and debris, and rest assured that Shimano's simple thru-axle and pinch bolt design returns to make installation quick and pain-free, once again.

  • Upgraded crank arms ready for everything on-trail
  • Lighter construction delivers impressive durability
  • Improved bearings roll smoother and are better protected
  • Reviews
  • Q & A

Nuttin' fancy

  • Familiarity: I've put it through the wringer

Shimano's tried and true XT crank optimized for 1x and hollowed out for lightness. Just a great crankset at a great price. Love it, I also went with the absolute black chainring and love the system works.

Great Crank

  • Familiarity: I've used it several times

This crank was simple to install in place of the older XT crank I had before. It's stiff and light, Set it and forget it!

Will this fit my 2016 beargrease carbon x7? I believe it has a 41x121 bb. Or do you have better/similar recommendations from raceface? Thx!

They have boost and fat bike sizes. Cheer´s

Great crank

  • Familiarity: I've put it through the wringer

This is a really great crank. Not too pricey, but good and stiff, and looks good too! I put a red AB oval ring on mine, and it is a sight to behold!

Great crank

Wife's Upgrade

  • Familiarity: I've put it through the wringer

I purchased a stock Specialized Rumor for my wife and have been upgrading components as time/money permit. For $95 you will never find a better set of crank arms. I am changing her over from a 3 x 9 to a 1 x 10 system with XT all the way through. Great purchase, easy to maintain and will take any physical abuse you want to apply to them.

Does this crank set come with chainring bolts?

Yes, they come with chainring bolts :-)

Press fit or threaded bottom bracket ?

Hi Blair,



These will work with a few different bottom brackets, it will depend on which frame these are going into.

Best bang for your buck!

    Very nice and light crankset

    Best bang for your buck!

    Stoked!

      I have always wanted XT cranks. I can't believe I got them at such an awesome price with free 2nd day shipping. Love the goat!

      I interes 180mm you have?

      Works great!

      • Familiarity: I've put it through the wringer

      These are used on a trail bike with a 32 tooth OneUp ring. Chain line is great, no issues after several hundred hard miles.

      Unanswered Question

      Why would this only work with 11 speed? Couldn't it work with a 10 speed single as well?

      Solid Performer

        I've had about a half dozen rides so far on my complete XT 1X11 set up, on mixed single-track, moderate downhill and serious climbs. So far I love it! I know it's not as light as the SRAM drivetrains, but the cost and simplicity of the drivetrain swap pays big time. No dropped chains, no mis-shifts. I'm really loving it. Coming from a 3X or 2X set up, I don't have the top-end road speed, but who cares! If you're thinking about upgrading, do it.

        good cranks, no BB

          The tech specs made me beleive that this came with a shimano bottom bracket, but the crank arms do not. Still real solid crank arms to say the least but wish for the price it came with a bottom bracket, for the same price I could have gone with a zee crankset and it would have come with chainring and BB

          Unanswered Question

          Hi,
          I have a Scott Spark 950 with shimano fc m622 crankset, will this xt crankset fit with the bottom bracket installed? I think its BB92

          Does this crankset come with a bottom bracket??

          Hi Ruben,

          No, these crank arms do not come with a bottom bracket.

          If you have any other questions, feel free to reach out to me directly.

          Thanks,

          XT is Awesome

          • Familiarity: I've put it through the wringer

          I love the new 1x11. I have waited some time for XT to come out with the 1x11 for a upgrade and it was well worth the wait. Flawless shifting and light weight.

          Great way to go 1x

          • Familiarity: I've used it several times

          Shimano XT has always been my number one choice for drivetrain and brakes. The value provided is the best in the industry and as the years go on, XTR technology always trickles down to the XT level.

          The new M-8000 series cranks are no exception to the above statement. The cranks are plenty light and stiff and are easily mounted with their thru axle and pinch bolt design. It is worth noting to absolutely follow the torque specs for the pinch bolts printed on the non-drive side crank. Tighten the bolts in sequence, to assure even clamping force, make sure the plastic clip is seated and flush, and use a torque wrench to achieve the recommended setting. Ride your bike then check these again.

          All in all these are a great crankset, packing performance and value in a sleek black package...About that black finish-
          The black coating is wearing off very quickly due to shoe contact with the crank, leading to a polished surface beneath. This doesn't really bother me, but it can be a bit unsightly. A person could use one of the many aftermarket crank protection films on the market, or some clear 3M tape.