- Detail Images
The fastest wheels on earth.
If you've been looking for the fastest wheel on the planet, you've found it. The Reynolds RZR 92 boasts the lowest drag values, the highest levels of stability and handling, and the lowest weight of any 80+mm wheel on the market. In fact, compared to its closest 80mm rival, paired with a rear disc wheel, the RZR 92 saves 20 watts -- translating to a roughly 23 second advantage over the length of an Ironman course.
Now, we're going to be forward -- the complexity of the RZR design is deep, but we'll walk through it together. To start, we need to understand the prevalent ideology in aerodynamic wheel design, and to do so, we need to understand drag. What is it? Simply put, it's the restraining force that acts on the wheel when its direction of motion is counter to the free stream of airflow. Now, airflow near the surface of a wheel is turbulent by nature, and when it comes close to the rim surface, it becomes a turbulent boundary layer. This is the start of two kinds of drag, skin friction and pressure drag. Currently, wheel makers are attempting to harness the turbulent layer, reattaching it at the rear section of the rim. The reasoning behind this is that the system reduces pressure drag, but in return, the wheel sees gains in skin friction. However, this is viewed as a positive trade-off, as skin friction has around a ten-fold lower drag value than pressure drag.
To maximize this turbulent system, we've been seeing engineers create a constant, rounded edge at the spoke face. For those attempting it, it's been viewed as a leap forward in design. However, Reynolds finds it to be counterintuitive. We'll explain. You see, the science of aerodynamics has developed almost as a case of supply and demand. As aviation technology develops, engineers are forced to develop more efficient airfoil designs, and these designs take the shape of what's called a NACA profile -- think of a stretched out tear drop shape. In recent years, though, some wheel designers have started to view the NACA profile as insufficient to the aerodynamics of wheels. The reasoning behind this is that while an airfoil only has what are called a leading and trailing edge, the rim's shape requires a trailing edge to double as a leading edge. Thus, we see the wide, rounded spoke faces of today. However, given that these systems rely on turbulence, Reynolds views this development as a step back from the proven designs of the airfoils that smooth turbulence. And this is just what the RZR 92 does with what Reynolds is calling, Dispersive Effect Termination (DET).
Starting at the rim bed, the RZR 92 features an ultra-wide maximum width of 28.0mm. As a tubular, this eliminates the drag-increasing balloon effect caused by a tire being wider than a rim. Now, the tire width matches the leading edge of the rim, creating less turbulence at the airflow's introduction to the wheel. The benefits to this design are four-fold -- it delivers an aerodynamic benefit, it increases lateral rigidity, it increases comfort, and it decreases rolling resistance. Moving down to the spoke face, the RZR 92 rim and carbon fiber spokes are shaped in a NACA-profiled, tapered V-shape that ends with a sharp trailing edge. This is where Reynolds starts to challenge the status quo. Basically, the RZR's shape actually smooths airflow over the wheel, and when that air passes the spoke face, it's easily reattached at the rear of the rim. So, the RZR places a focus on mitigating turbulence, not accepting it. In fact, testing performed at the A2 Wind Tunnel shoes the RZR experiencing less drag in watts at 30.75mph, at every conceivable yaw angle (0-18 degrees), then any offerings from its most popular competitors.
So, with DET, drag is greatly reduced. However, Reynolds wasn't content with just this. In fact, Reynolds views the aerodynamic engineering of wheels as a four-part structure. 1) The wheel must be lightweight, yet structurally sound. 2) It must reduce turbulent airflow in order to create a low-drag system. 3) The aerodynamic efforts cannot compromise the steering and handling of the bike. 4) The wheel must generate an aerodynamic advantage from its lift-drag-ratio. Not surprisingly, one wheel rarely encompasses all of these traits. In fact, we find that article numbers Two and Three actually tend to contradict one another -- think of a disc wheel. However, at around 1470 grams, and with the lowest drag system on the market, the RZR 92 accomplishes all of the above harmoniously. But, to solidify this, let's get into requirements three and four.
This brings us to DET's most impressive characteristic, handling. In relation to the bearing, it's rare to have a real-world circumstance of a straight 180 degree head wind. In reality, you spend 95% of your riding time between 0 and 20 degrees of yaw with a wind angle anywhere from 0 to 100 degrees in relation to the bearing. Accordingly, DET places a focus at improving handling while side force is acting on the wheel. To do so, the DET rim shape pushes the center of pressure forward, beyond the center of mass (hub axle center), for a more stable steering force. For reference, the Firecrest's center of pressure is a little behind the center of mass. But, in the case of DET, the lift and drag vectors are shifted into a favorable position that extends the range of lift, and as a result, it delays aerodynamic stall (the point where the drag vector is larger than the lift vector) in order to achieve a larger 'sweet spot.' Why is this important? Well, it creates a more predictable sense of handling, conserves watts, and requires less steering input from the rider. Additionally, the DET shape prevents stall at angles before 20 degrees of yaw, while most competitors' offerings experienced stall between around 12.5 and 14 degrees of yaw. This means that the RZR's handling 'sweet spot' is extended to a window of 7.5 degrees higher than the competition. You'll also find that DET's center of pressure maximizes the forward thrust vector (a quantity that has direction and magnitude), while the rim shape increases lift and decreases turbulent flow. So, the effective lift-to-drag ratio creates a forward thrust that, basically, requires you to exert less watts to propel the wheel forward. Essentially, this system works almost like a turbine that feeds off of the wind.
With the RZR, Reynolds also addressed an all-too-common ailment to carbon wheels -- poor braking. The solution was found through the development of what Reynolds calls its Crynogenic Glass Transition Braking System (CTg). Essentially, this is a patented braking design that required both a redesign of the brake track laminate and pads. Accordingly, CTg uses a temperature-conductive laminate at the brake track's transition points that withstands higher levels of heat than typical carbon laminates (around a 100 degree dispersion). And when paired with Reynolds' polymer Cryo Blue brake pads, braking becomes more predictable and requires less finicky feathering on fast descents.
Lastly, it's impossible to not notice the RZR's carbon spokes and hubs. However, it is easy to miss that the rear hub features three hub flanges. The additional flange is positioned as to lie under the center point of the rim. So, while the radial spokes provide lateral support to the wheel, and the tangential spokes transfer torque from the hub to the rim, this 'torque flange' ensures that applied torque is pulled within the same plane as the rim's center. This increases efficiency over the standard two flange system, where the spokes pull the rim to the left or right plane with applied torque. For the spokes themselves, Reynolds not only used carbon fiber, but they're actually small airfoils -- a NACA 0033 airfoil, in fact. This designation means that the width is one-third of the length, but more importantly, it further reduces turbulent airflow over the wheel.
The Reynolds RZR 92 Carbon Tubular Road Wheelset is available in the color Black with White labels and in a tubular configuration. Please note that the rear wheel is offered with either a Shimano or Campagnolo 11-speed freehub compatibility. Also, every wheelset includes two pairs of Reynolds Cryo Blue Brake Pads. Reynolds strongly recommends only using its proprietary pads, and the use of any other brake pads will result in a void of your warranty.