Race Face Turbine 35mm Stem
Race FaceTurbine 35mm Stem

This stem sells.

35mm handlebars are blowing up, but the necessary stems are a little behind, so Race Face made the Turbine 35mm Stem to give fat-barred rippers a little bit of dap. It's largely the same as the standard Turbine, with a bombproof 7075 aluminum body, a four-bolt clamp, and opposing steerer bolts to provide serious power with causing any damage. It's also angled at six degrees, so you can add a little rise to your bars or lower them a little bit, depending on which way you install it. The only real difference between the classic Turbine and the 35mm is the diameter of clamp which, obviously, has been enlarged to 35mm. Even with the size increase, the Turbine 35mm weighs in under 140g, so it won't slow you down if you're looking to keep things light.

  • 7075 aluminum
  • 35mm bar diameter
  • 1.125in steerer tube diameter
  • +/- 6-degree rise
  • Reviews
  • Q & A

Top quality stem

  • Familiarity: I've used it several times

I'm what the youngen's have called "old sckool." Purchased a new cf bike and the stock 50mm stem just didn't deliver on climbs or out of the saddle pedaling. This stem works perfect. Recommend!

only stem i will run ever again

  • Familiarity: I've used it several times

I have had 3, 50mm stems on my past 3 bikes. I know it works for me so why change it? I've never broken a stem. I really doubt I ever will. So I saved myself a few grams and went turbine over atlas.

Solid Stem

    Just slapped one of these on my new bike and it definitely does the trick. It's a good price and has good rise for my 35mm bars.

    Great Stem

    • Familiarity: I've put it through the wringer

    Not much a stem can do right or wrong really... but this one looks great, comes in all the sizes you would want/need, and is a reasonable weight while still being confidence-inspiring-ly burly. It also has 6 degrees of rise, which I love because that means I can use less spacers. If you're trying to get as slammed as possible, they make a new "R" version of this stem with zero rise.

    Nothing Fancy But Does the Job

    • Familiarity: I've put it through the wringer

    Race Face made a great stem when it put out the Turbine. Those looking for a short stem but with a slight rise to it will find that the this stem will fit your needs. Not many 35mm clamp stems out there and this one provides the stiffness you are looking for when running 35mm clamp handlebars. The picture above does not do it justice as it looks more glossy and cleaner in person.

    Keep it simple

      No need to dig into details - I debated between this stem and the Atlas, but ultimately went with this one based on appearances alone. A little less bulky looking with a cleaner cosmetic look to better go with my black frame.

      Its a stem

      • Familiarity: I've put it through the wringer

      Some people said that I would need a burlier stem for a Nomad. I replied "When is the last time you or anyone you know snapped a stem?"

      Top quality stem

      • Familiarity: I've put it through the wringer

      I purchased this in a 90mm length to extend my fatty cockpit ever so slightly. Stem machining is very nice and has that OE look. Would recommend.

      Excellent Race Face Quality

      • Familiarity: I've put it through the wringer

      This is my second Turbine stem, the first being the 31.8 size with SixC carbon bars. I upgraded and paired up with a nice set of Race face SixC 35 carbon 35mm riser bars! It's a great stem. Design looks awesome when mounted up.

      Excellent Race Face Quality