"This carousel displays a list of buttons that updates the main product image when a button is clicked"
Race Face - Cinch BB92

Race Face Cinch BB92

15% Off
$50.99 $59.99

Select style & size:

Select options
  • Select options
    • Black, 92
      sale $50.99



    Tech Specs

    Manufacturer Warranty:
    2 years

    Pairs nicely with Next SL cranks.

    The Race Face Cinch BB92 Bottom Bracket is an ingenious solution to fitting Race Face's Next SL crankset to your bike with a Shimano BB92 shell. Realizing the BB92 standard accommodates a 24-millimeter spindle, the engineering gurus at Race Face use 19 custom ball bearings to increase strength, which is essential since the jump to the Next SL Crankset's 30-millimeter spindle leaves less room for the bearing. And since less clearance could be detrimental to durability, the increase to 19 bearings ensures robust performance, without any sacrifice in overall strength. Moreover, it's filled with Phil Wood bearing grease for reduced friction. There's also a plastic inner sleeve to protect the bearings from the intrusion of outside moisture from working into the bottom bracket shell.

    • Shimano BB92 shell type
    • Accommodates 30mm crank spindles
    • Custom 19 retainer bearings
    • Bearings filled with Phil Wood grease
    • Includes protective inner sleeve

    not the most resistant BB

      Race face installed very small bearings in order to make the 30mm diameter. This leads to infant failure of the BB. At $50 the replacement is not the best option.

      Beyond fantastic

      • Familiarity: I've put it through the wringer

      Giving 5 Stars because more stars are not available. In Feb 2015 I bought this BB and a set of Race Face Next SL cranks for my Scott Spark. I raced the spring and fall series (12 races) and rode a total of 8500 miles in 2015. I bought a new Race Face BB92 BB and planned to replace the original in December in preparation for the 2016 season. But when I removed the cranks and checked the BB, it was still buttery smooth and solid. So I trained and raced the 6 spring season races with no BB issues. May 2016 I started a ride on my Scott Spark from Houston, TX to Sacramento, Ca (2800 miles with 100,000+ ft of climbing) with several full days of rain, many 100+ degree temperature days, and some days below freezing...still no issue with the BB. I did carry the spare BB with me, JUST IN CASE. After getting back home I checked everything on the bike. I changed the cables, housings, chain, cassette, and chainring. But the BB was still solid, so I left it in the frame. 2016 ended with almost 9000 miles on the Spark. Once again, December was on schedule to replace the BB...still buttery smooth, the original Race Face BB92 stayed in my bike . Fast forward through 2017 to August 23rd. I sold the bike. I never changed the BB with nearly 20,000 miles on it. I did, however, give the spare BB to the new owner, along with the Race Face BB92 BB history. Given the choice of a Race Face Cinch BB92 BB or any other BB, I'll take the Race Face. Thank you.

      Solid For The Price

      • Familiarity: I've put it through the wringer

      This BB came stock on my bike and lasted a solid 2 seasons of riding until it started creaking. I'm OK having to replace it with a new one at this point .


      • Familiarity: I've put it through the wringer

      These things wear out the day you buy them. 41mm hole with 30mm spindle... you do the math. Complete crap creeked and made noise for 1.5 years of riding until I replaced with enduro bb92 kit with no shell. Now my crank is buttery smooth and solid. Can’t believe all the 5 star reviews.

      Just what I needed to upgrade to Cinch

      • Familiarity: I've used it once or twice and have initial impressions

      Bought a used bike with outdated components while I learn to ride trails. Upon destroying my previous crank, I decided to swap modern parts to my 2015 Trek. Decided on the RF Cinch crank and this was the BB needed for my bike. Components seem to be well built and hopefully a little green Loctite will keep things from creaking. Multiple options for fat bike builds. Can't go wrong with Raceface.


      • Familiarity: I've used it once or twice and have initial impressions

      Had to grab one of these for my Pivot Mach 5.5 build. Paired with a Race Face Sixc crank set and have been super happy with it! No creaky noises here!


      • Familiarity: I've put it through the wringer

      This came stock on my bike and works great! I have been using it for a while and does not make any noises and just works great.

      No more creaks!

      • Familiarity: I've used it several times

      Creaky bb? swap it out to this, and get back to running quiet again.

      Perfect solution

      • Familiarity: I've put it through the wringer

      I have a Sram BB30 Quarq and needed to pair to my Giant Propel. I tossed this sucker in and tossed the center section to make it BB92 and so far so good. No creaking and super quality build.

      Rarely seen, never heard

      • Familiarity: I've put it through the wringer

      Your bottom bracket should be something you rarely look at, and never hear. I've had 3 Cinch PF style BBs on varying bikes, and never had cause to look at them. Smooth and silent, just as a good bottom bracket should be.

      How long service can a person expect from one? I had Hope Pressfit 41 on my Yeti 4.5c. The drive side bearing got rough after only 7 months of casual riding.

      Perfect for the job

      • Familiarity: I've put it through the wringer

      Works just fine. Make sure your compatibility is correct before you order; frames have different BB shell sizes and compatibility for cranksets. Shoot me an email if you have any questions about compatibility, or if you're looking to build up a particular frame...I can always make sure you're matching it up correctly.


      Fits the Mach 6

        Most important thing with a Bottom Bracket, make sure it fits your frame and crankset. This Race Face Cinch BB92 slipped right into my new Pivot Mach 6 and has worked great so far, my bike pedals like a machine.

        Big thanks to Joe Bolton in our Retail Store Bike Shop for getting my new Mach 6 put together. If you are ever in Salt Lake City definitely stop by our Retail Store to check out their bike selection and visit Joe (2607 S 3200 W, Suite A, West Valley UT 84119). Contact me with any questions about this BB, especially if you are interested in custom building a new mountain bike.

        Kyle L. - Expert Gearhead - klivingston@backcountry.com - 801-736-4337

        Frame - Pivot Mach 6, Large Stealth Black/Green

        Crankset - Race Face Turbine Crank Arms - Black, 175mm

        Bottom Bracket - Race Face Cinch BB92

        Fits the Mach 6

        Does what its supposed to

        • Familiarity: I've put it through the wringer

        The right bottom bracket for you if you have a Pressfit 92 bike (like a modern Giant, Trek, or Pivot) and want to run a Race Face Cinch Crankset (like Next SL, SIXC, Turbine, Atlas, or Aeffect). Presses into the shell easily and after a full season of riding has not had any creaks. Not compatible with any other crankset besides RF Cinch.