Hydro Glove Water Shoe
Designed for sun-filled days on the water, Merrell's Hydro Glove Water Shoe enhances your performance while you paddle. Whether your mode of transport is kayak or SUP, these sticky-bottomed shoes will rip, grip, and keep you comfortable. Mesh uppers dry quickly after a dip in the water, while the high-performing rubber soles provide reliable traction on all your toys. The shoes are lined with textile to enhance breathability, and feature a hook-and-loop strap to help you adjust for the perfect fit.
- A barefoot-style shoe for paddling with your SUP or kayak
- Mesh uppers dry and drain quickly after leaving the water
- Vibram outsole delivers reliable traction on your board or boat
- Neoprene collar provides comfortable stretch
- Rear pull tab makes the shoe easy to pull on and off
|Men's Footwear||Women's Footwear|
|Men's Sandals||Women's Sandals|
- Merrell Sizing Notes:
- Merrell boots are designed to fit like your street shoes.
When ordering Merrell boots, shoes, or sandals, you should reference your normal shoe size.
- What to Expect:
- A snug fit in the heel: In a stride, your foot bends at the ball, and the heel tries to pull away from the boot.
Because of Merrell's precise fit, the upper follows the heel. This prevents the slipping and sliding that eventually causes blisters.
Snug over the instep: Besides preventing the toes from sliding forward when you go down hill, a precise instep fit gives you internal control.
When you're standing on sloping rocks, the boot sole doesn't sideslip underneath you.
Toe Room: Merrell gives plenty of room to the toes. This room, combined with a sturdy toe box, protects the toes from getting bashed by rocks.
- Choosing Socks:
- For Hiking Boots choose heavyweight, thick, dense socks, with or without a liner sock.
For Multi-Sport choose light-or medium-weight dense socks.
- Before You Take Your Merrells to the Trail:
- 1) Try your new boots on over the correct sock combination without lacing.
Stand and push your toes forward so they touch the front of the boot.
You should be able to slip one finger into the space behind your heel.
If there isn't enough room, the boot is probably too small and you should try the next half-size larger.
For boots to be used while carrying a moderate-to-heavy pack, a full finger space is recommended.
- 2) Tap your heel back in the heel cup and lace the boot.
The boot should feel snug across the ball, around the instep, and in the heel.
The arch should be comfortably supported and the toes should be free to wiggle and curl.
- 3) To check the fit in the heel, walk up an incline. The heel should lift a maximum of 1/2 inch (1.75cm).
- 4) The toes should not jam into the front of the boot.
Checkthis by walking down an incline or tap your toe lightly into the floor or against the wall. If the boot fits correctly, the toes should gently touch the end of the boot.