Mission Pro Complete Mountain Bike - 2017
Out of Stock
Don't worry though, we have a lot more Trail/All-Mountain Full Suspension Bikes in stock than that.
Shop Similar ProductsPoint and shoot confidence.
Formidable descents with sharp drop-offs, loose rocks, and intimidating hits are suddenly a whole lot easier when you're piloting the beastly Diamondback Mission Pro Complete Mountain Bike. Pegged as Diamondback's premiere long-travel enduro rig, the Mission Pro eats up rocky stretches of singletrack and devours the steepest trail sections without feeling unnerving at speed, thanks to its 160 millimeters of Knucklebox Suspension paired with a T6 weapons-grade aluminum frame for stout reassurance when you're rallying through the rough stuff.
Looking at the Mission Pro's geometry figures, you'll find it's firmly pegged as an enduro sled with its slackened 66.5-degree head tube angle and lengthened wheelbase providing stability to hold your line at speed. However, it still pedals relatively well for its slackened, gravity-devouring stature, courtesy of a 73.5-degree seat tube angle placing you in an optimal position to lay power down on uphill sections. And even though it's not the lightest bike in its class, you can easily take the Mission Pro on all-day adventures with thousands of feet of both climbing and descending.
Compared to others in the all-mountain/enduro category, the Mission Pro is equipped with a premium parts spec that would normally cost a few thousand more. Diamondback saves you money on the build by retaining their aluminum frame instead of going to carbon, which then translates to a nicer component spec. In fact, you'll find a Fox Factory 36 Fork paired with a Fox Float X2 Factory Shock for a smooth, supple sensation with ample stiffness up front for plowing through rocky terrain at speed.
Diamondback equips it with a Shimano XT 1x11 drivetrain with a wide range 11 to 42-tooth cassette, which gives you plenty of gear range for rides consisting of extended descents followed by long climbs back up. Additionally, you'll find the tried-and-true stopping power of Shimano XT brakes, plus the dependable strength and lightweight efficiency of a Race Face Turbine R aluminum wheelset.
Details
- Diamondback's premiere enduro sled devours steep, rocky trails
- 160mm of Knucklebox travel to absorb rough terrain and big hits
- T6 weapons-grade aluminum frame for robust strength
- Slack 66.5° head tube angle for confidence on steep trails
- Relatively long wheelbase remains composed at high speeds
- Fox 36 Factory fork with 160mm of rock-eating travel
- Fox Float X2 Factory shock for increased suppleness
- Shimano 1x11 drivetrain provides wide range of gears
- Item #DMB0056
- Frame Material
- T6 weapons-grade aluminum
- Suspension
- Knuckle Box
- Rear Shock
- Fox Float X2 Factory
- Rear Travel
- 160 mm
- Fork
- Fox Factory 36 Float
- Front Travel
- 160 mm
- Headset
- FSA No 57E Tapered w/standard cups, sealed cartridge
- Shifters
- Shimano XT M8000 I-Spec, 11-speed
- Front Derailleur
- n/a
- Rear Derailleur
- Shimano XT M8000, 11-speed
- ISCG Tabs
- yes, ISCG-05
- Crankset
- Shimano XT M8000 (32T)
- Bottom Bracket
- Shimano Outboard Bearing
- Cassette
- Shimano XT M8000, 11-speed (11 - 42t)
- Chain
- Shimano HG95, 11-speed
- Brakeset
- Shimano XT BR-M8000
- Brake Type
- hydraulic disc
- Rotors
- IceTec 180mm
- Handlebar
- Raceface Atlas, 35 mm
- Handlebar Rise
- 10 mm
- Handlebar Width
- 800 mm
- Grips
- DB4L lock-on
- Stem
- Raceface Atlas, 35mm
- Stem Length
- 50 mm
- Saddle
- WTB Volt Pro
- Seatpost
- Rockshox Reverb Stealth, 30.9 mm
- Wheelset
- Race Face Turbine R
- Hubs
- Race Face Turbine R
- Front Axle
- 15 x 110 mm Boost thru-axle
- Rear Axle
- 12 x 142 mm thru-axle
- Tires
- WTB Vigilante Enduro TCS/DNA High Grip Compound (tubeless)
- Tire Size
- 27.5 x 2.3 in
- Recommended Use
- enduro
- Manufacturer Warranty
- lifetime on frame
Reviews
Q&A
View
Selecting an option will reload the available reviews on the pageSorry, we don’t currently have any of those types of reviews for this product.